Selection & Operations
Buying and running the system: how to specify readers, tags, antennas and printers, how to benchmark vendors, and how to keep a live RFID estate healthy after commissioning.
Articles in this topic
LF vs HF vs UHF RFID: How the Frequency Band Decides the Use Case
Frequency is the first RFID decision and the one most often made by habit. This is how LF, HF and UHF differ in physics, range, tag cost, metal tolerance and regulation — and which band to standardise on.
RFID System Operations: Monitoring the Layers That Actually Fail
Acceptance proves the hardware worked on the day the integrator left. Operations decides whether anyone still trusts the numbers a year later. A practical monitoring model across device, middleware and business layers, with eight thresholds and a weekly loop.
How to Choose RFID Tags: Frequency, Material and Cost
Tag selection is a sequence, not a catalogue lookup: frequency, then environment, then attachment, then chip memory, then cost. Get the order wrong and the pilot fails on metal shelves, not on the datasheet.
UHF RFID Tag Encoding Best Practices: EPC, TID and Lock Bits Done Right
Encoding is the step that decides whether a tag is an asset or a liability. Get the EPC schema, the TID check, the lock order and the verification pass right, and the roll-out survives contact with the warehouse.
Fixed, Handheld or Ceiling: How to Choose a UHF RFID Reader
Reader selection follows the read point, not the product tier. Six measurable dimensions — range, interference, ports, installation, integration and lifecycle — decide which form factor belongs where.
Ten RFID Deployment Pitfalls: The Ones That Actually Sink Projects
Hardware is rarely the reason an RFID programme fails. These ten pitfalls — from buying readers before defining the process to a pilot that proves nothing — account for most of the disappointment, and each has a specific countermeasure.